!9# Goulds GT20 Irrigator - 2 hp Irrigation Pump
Rate :
Post Date : Apr 04, 2012 07:18:22
Usually ships in 1-2 business days
FEATURES:Self-Priming Design: Once pump is initially primed, filled with water, it will reprime when the water level rises above the end of the suction pipe.Serviceable:? Back pullout design allows disassembly of pump for service without disturbing piping.? Two compartment motor for easy access to motor wiring and replaceable components.Diffuser (Guidevane): Bolt down diffuser provides positive alignment with impeller. Diffuser has stainless wear ring for extended performance in abrasive conditions. F.D.A. compliant, injection molded, food grade, glass filled Lexan® for durability and abrasion resistance.Impeller: F.D.A. compliant, glass filled Noryl®. Corrosion and abrasion resistant.Corrosion Resistant: Electro-coat paint process is applied inside and out, then baked on.Casing: Cast iron construction. Four (4) bolt, back pull-out design. Tapped openings provided for vacuum gauge and casing drain.Powered for Continuous Operation: Pump ratings are within the motor manufacturer's recommended working limits. Can be operated continuously without damage.Mechanical Seal: Carbon/ceramic faces, BUNA elastomers. 300 series stainless steel metal parts. Pump design prevents the seal from running dry.APPLICATIONS: Specifically designed for the following uses:? Lawn sprinkling? Irrigation? Air conditioning systems? Heat pumps? Water transfer? DewateringGENERAL GT SERIES SPECIFICATIONSPump:? Pipe connections:1½" NPT suction1½" NPT discharge? Capacities: to 110 GPM at 5 foot suction lift? Heads: to 128 feet? Reprime capabilities: to 25 feet suction lift? Maximum working pressure: 125 PSIG? Maximum water temperature: 140° F (60° C)? Rotation: clockwise when viewed from motor end.Motor:? NEMA standard open drip proof? 60 Hz, 3500 RPM? Stainless steel shaft? Single phase: ¾-1½ HP, 115/230 V; 2 and 3 HP, 230 V only. Built-in overload with automatic reset.
No comments:
Post a Comment